Motorola Symbol MC70 Hard Reset Files DOWNLOAD: MC70CLEANERS010100

TR: Motorola MC 70XX Windows Mobile 5.0 El Terminalini fabrika ayarlarına döndürmek için;

KURULUM

1.      El terminali Cihazınızı bilgisayar ile iletişim haline getiriniz. (şarj aleti üzerine yerleştirip active sync / Windows mobil aygıt merkezi programı sayesinde bu işlemi yapabilirsiniz.)

2.      İndirdiğiniz zipli dosya içerisindeki dosyaları Bilgisayarım – Mobil Aygıt – Windows Mobile Tabanlı Aygıtım – My Documents klasörü altına kopyalayınız.

3.      Kopyalama işlemi bittikten sonra cihaz üzerinden Başlat – Programlar – File Explorer tıklayınız. Ekranın sol üst köşesinde açılır bir liste kutusuna tıklayarak My Device’ın içerisine giriniz. Buradan My Document içerisine oradan da kopyalamış olduğunuz klasörün içine giriniz. Klasörü içindeyken ekranın sağ alt köşesinde Menu – Edit – Select all seçeneklerine sırayla tıklayınız. Bütün dosyalar seçili hale gelecektir. Daha sonra seçili olan herhangi bir dosyanın üzerine basılı tutun ve ufak bir menü açılacaktır.bu menüden copy seçeneğiyle bütün dosyaları kopyalayalım.

4.      Kopyaladıktan sonra bu pencereyi kapatıp anasayfaya gelelim. Sonrasında Başlat – Programlar – File Explorer – My Device – Temp klasörü içine girelim. Burada bulunan bütün dosyaları silelim. Sildikten sonra boş bir yere basılı tutalım. Açılan menüden Paste seçeneğine tıklayıp kopyalamış olduğumuz dosyaları buraya yapıştıralım. Buradaki kopyalama işlemi bittikten sonra cihaz cradle üzerindeyken (şarj adaptörününe A/C bağlı olmalıdır). Aksi takdirde clean boot / hard reet işlemi başlamayacaktır.

5.      Şimdi işlemi başlatalım. Dosyaları içerisinde StartUpdLdr.exe dosyasını çalıştıralım. Çalıştırdıktan sonra geri kalanı cihaz kendisi tamamlayacaktır. Işlem bittikten sonra cihaz kendini resetleyecek ve açılacak. Bu şekilde fabrika ayarlarına çevrilmiş olacaktır.

En:

70XXCLEANBOOT.ZIP

This file is intended for use when a CLEAN BOOT of an MC70XX WM 5.0 device is required.  Unzip the contents of this device to either the root of an SD Card (and place the SD Card in your device) OR the TEMP folder.  Then follow the UPDATE LOADER boot instructions below.

70XXCLEANBOOTANDBLANK.ZIP

This file is intended for use when both a blank Application Folder and a CLEAN BOOT of an MC70XX WM 5.0 device is required.  Unzip the contents of this device to either the root of an SD Card (and place the SD Card in your device) OR the TEMP folder.  Then follow the UPDATE LOADER boot instructions below.

There are two methods to perform an Update Loader Boot on MC70XX:

Method 1

1. Navigate to the location where the ZIP file was unzipped

2. Tap ‘StartUpdLdr.exe’

3. After 20 seconds or so, the device will perform an Update Loader boot which will cause the PKGS.LST file deposited on the device to be processed. Leave the device on A/C power during the Update Loader process

Method 2

1. Cold boot the MC70XX by pressing the 1 Key + 9 Key + Power Key simultaneously.

2. Immediately as soon as the device starts to boot (before the splash screen is visible), hold the upper right hand trigger key.

3. The screen should display a message with the words “Update Warning” at the top of the screen.

3. Place the device on A/C power either by placing it in a cradle or a CAM.  The update will automatically start after AC power is detected.

6. The device will invoke an Update Loader boot, which will cause the PKGS.LST file deposited on the device to be processed. Leave the device on A/C power during the Update Loader process.

When the device has completed the process it will return to the Windows Mobile “”Tap the screen to set up your Windows Mobile-based device” screen.  At this point, if you used an SD card, please remove it from the device.  If you placed the files in the TEMP folder, they will be automatically erased by the CLEAN BOOT process.